RW8300-E

The RW8300 Wi-Fi single port router + Bluetooth Low Energy Series is designed to fully integrate Ethernet LAN, Bluetooth V5.3 Smart® and Wi-Fi IEEE802.11n™, IEEE802.11e™ and IEEE802.11i™ standards. The RW8300 series offers router or Hotspot capability from Ethernet to Wi-Fi as well as Wi-Fi or Ethernet adapter from Wi-Fi or Ethernet to USB interface plus data collection or remote control from BLE.
It can turn any Ethernet LAN port to a Wi-Fi Hotspot or BLE gateway IoT center. It is fully embedded for various Wi-Fi and BLE applications and is not requiring extra CPU host. RW8300 also embeds the entire protocol stack of networking.
This versatile RW8300 series offers web and AT command configuration options to meet the specific system requirements.

Category:

The RW8300 Wi-Fi single port router + Bluetooth Low Energy Series is designed to fully integrate Ethernet LAN, Bluetooth V5.3 Smart® and Wi-Fi IEEE802.11n™, IEEE802.11e™ and IEEE802.11i™ standards. The RW8300 series offers router or Hotspot capability from Ethernet to Wi-Fi as well as Wi-Fi or Ethernet adapter from Wi-Fi or Ethernet to USB interface plus data collection or remote control from BLE.
It can turn any Ethernet LAN port to a Wi-Fi Hotspot or BLE gateway IoT center. It is fully embedded for various Wi-Fi and BLE applications and is not requiring extra CPU host. RW8300 also embeds the entire protocol stack of networking.
This versatile RW8300 series offers web and AT command configuration options to meet the specific system requirements.

Application:

Single port router
Hot spot sharing
USB Ethernet adapter
WiFi dongle
LAN to WLAN adapter
WLAN Bridge
Bluetooth V5.3 Smart device

Features:

Wi-Fi

IEEE 802.11b/g/n compatible WLAN
WiFi AP/Client
Router capability
WiFi USB adapter, USB Ethernet adapter
20MHz and 40MHz bandwidth transmission
Backward compatible with 802.11b/g devices while operating at 802.11n data rates
Frame aggregation for increased MAC efficiency (A-MSDU, A-MPDU)
Support W PS mode
Low latency immediate High-Throughput Block Acknowledgement (HT-BA)
Long NAV for media reservation with CF-End for NAV release
PHY-level spoofing to enhance legacy compatibility
Channel management and co-existence
Support Wake-On-WLAN via Magic Packet and Wake-up frame
Transmit Opportunity (TXOP) Short Inter-Frame Spaces (SIFS) bursting for higher multimedia bandwidth
Short Guard Interval (400ns)
DSSS with DBPSK and DQPSK, CCK modulation with long and short preamble
Selectable digital transmit and receive FIR filters
Built-in TCP/IP stack
Support DHCP for LAN

Bluetooth 5.3 Smart (Single Mode)

Bluetooth V5.3 single mode Smart device
Support Host and client modes
Integrated Bluetooth Low Energy stack: ATT, GATT, SMP, L2CAP, GAP
Serial interface (UART/ SPI/ I2C) supported
12 digital PIOs, 3 analog AIOs
10-bit ADC embedded
Support wake-up interrupt and watch dog timer
Support passthrough data mode
Options for on-board antenna or external antenna

General

Operates in 2.4GHz Frequency Range
Firmware upgradable
Extended temperature of -40°C to +85°C
FCC/IC/CE (pending), RoHS compliant

Reviews

There are no reviews yet.

Be the first to review “RW8300-E”

Your email address will not be published. Required fields are marked *

Scroll to Top