RW8300-NE

Radicom Research’s RW8300 Universal Network Adapter Series is all new Wi-Fi/Ethernet with USB Host, USB Device or Serial Port. It is the perfect networking center solution for embedded system to integrate Wi-Fi, Ethernet or USB into a single platform. The AIO (All-In-One) networking capability provides many functions, such as single port router, Wi-Fi adapter, Ethernet adapter, Hotspot, Wi-Fi Repeater or Ethernet bridge, with USB host/device capability for various applications.

It can turn any Ethernet Ethernet port to a Wi-Fi hotspot or connect PC or Laptop into a WiFi Wireless Access Point. Any WiFi device such as iPhone, iPod, PDA, within range can connect to Internet by sharing your RW8300 Access Point.

The RW8300 series is a full embedded system. It does not require CPU host when using as single port router or hotspot mode. This versatile RW8300 series of products offers configuration options to meet the specific system requirements. It is also designed to meet the emerging market applications. It’s embedded with entire profiles, applications, so no external processor is needed. It contains an internal S-Flash so custom parameters and settings can be easily loaded into the module, and also supports AT-Command Set. solution availabilities for Smart (single mode) or Smart Ready (dual mode).

Category:

Radicom RW8300 Wi-Fi single port router + Bluetooth Low Energy series is designed to fully integrate Ethernet LAN, Bluetooth V4.2 Smart® and Wi-Fi IEEE802.11n™, IEEE802.11e™ and IEEE802.11i™ standards. The RW8300 series offers router or hotspot capability from Ethernet to Wi-Fi as well as Wi-Fi
or Ethernet adapter from Wi-Fi or Ethernet to USB interface plus data collection or remote control from BLE.
It can turn any Ethernet LAN port to a Wi-Fi hotspot or BLE gateway IoT center. It is fully embedded for various Wi-Fi and BLE applications and is not requiring extra CPU host. RW8300 also embeds the entire protocol stack of networking.
This versatile RW8300 series offers web and AT command configuration options to meet the specific system r equirements.

Application:

Single port router
Hot spot sharing
USB Ethernet adapter
WiFi dongle
LAN to WLAN adapter
WLAN Bridge
Bluetooth V4.0 Smart device

Features:

Wi-Fi

IEEE 802.11b/g/n compatible WLAN
WiFi AP/Client
Router capability
WiFi USB adapter, USB Ethernet adapter
20MHz and 40MHz bandwidth transmission
Backward compatible with 802.11b/g devices while operating at 802.11n data rates
Frame aggregation for increased MAC efficiency (A-MSDU, A-MPDU)
Support W PS mode
Low latency immediate High-Throughput Block Acknowledgement (HT-BA)
Long NAV for media reservation with CF-End for NAV release
PHY-level spoofing to enhance legacy compatibility
Channel management and co-existence
Support Wake-On-WLAN via Magic Packet and Wake-up frame
Transmit Opportunity (TXOP) Short Inter-Frame Spaces (SIFS) bursting for higher multimedia bandwidth
Short Guard Interval (400ns)
DSSS with DBPSK and DQPSK, CCK modulation with long and short preamble
Selectable digital transmit and receive FIR filters
Built-in TCP/IP stack
Support DHCP for LAN

Bluetooth 4.0 Smart (Single Mode)

Bluetooth V4.0 single mode Smart device
Support Host and client modes
Integrated Bluetooth Low Energy stack: ATT, GATT, SMP, L2CAP, GAP
Serial interface (UART/ SPI/ I2C) supported
12 digital PIOs, 3 analog AIOs
10-bit ADC embedded
Support wake-up interrupt and watch dog timer
Support passthrough data mode
Options for on-board antenna or external antenna

Reviews

There are no reviews yet.

Be the first to review “RW8300-NE”

Your email address will not be published. Required fields are marked *

Scroll to Top